Experimental research on micro hole drilling of polycrystalline Nd:YAG

Polycrystalline Nd:YAG materials have wide applications in solid-state lasers. In this study, micro hole drilling experiments were performed on polycrystalline Nd:YAG using a polycrystalline diamond micro drill. The hole diameter, edge chipping, and hole wall surface quality were examined in detail. The results showed that the hole diameter was slightly larger than tool diameter. A diameter error of less than 5.5% was achieved. The edge chipping at the entry hole was formed by the encircled petal shape exfoliations, which were produced by the indentation and rotation movement in the drilling entry stage. Edge chipping at the exit hole was generated by an entire piece of exfoliation, which was produced by a circle of microcracks around the tool tip propagating to the bottom surface in the drilling exit stage. The edge chipping width at the entry hole was smaller than that at the exit hole. Based on different material removal modes, the hole surface morphology was classified into three types: ductile removal, coexisting ductile and brittle removal, and brittle removal. The hole surface quality mainly depended on the proportion of the brittle fracture to ductile removal surface.     

我国中空吹塑行业发展现状及“十四五”期间重点产品、工艺和设备发展方向

从原料、中空成型机和吹塑工艺等方面介绍了我国中空吹塑行业发展现状，并对电子化学品专用超洁净桶、高压储氢四型瓶、全电动中空成型机、微发泡中空成型技术和挤吹聚对苯二甲酸乙二醇酯（PET）容器等在“十四五”期间的重点产品、工艺和设备发展方向进行了展望。     

基于灰色关联度的微孔端面机械密封开启力共性影响参数分析

目前微孔端面机械密封采用的几何参数繁多,缺乏明确物理意义。为找出跨孔型的共性几何参数,基于Fluent多相流空化模型,针对矩形孔、菱形孔、椭圆孔端面机械密封,建立密封间隙流体的三维数值计算模型,计算得到144条开启力数据;在分析开启力和几何尺寸之间的关系、额外开启力产生机制的基础上,提出等效长度和等效宽度2个具有物理意义的几何参数;采用灰色关联度分析法,分析和验证等效长度、等效宽度、方向角、面积比对开启力的影响,发现4个因素对3种微孔密封的间隙流体开启力都有影响,但等效长度与等效宽度的影响较方向角、面积比大。     

微结构模芯的精密磨削及其在微注塑成形中应用

针对微结构聚合物元器件的批量化生产与制造效率低等问题，采用精密修整成V形尖端的金刚石砂轮，在自润滑性和脱模性良好的钛硅碳陶瓷模芯表面加工制造出形状精度可控的V沟槽阵列结构，然后利用微注塑成形工艺将模芯表面的V沟槽阵列结构一次成形复制到聚合物表面，高效注塑成形制造出倒V形阵列结构的聚合物工件。分析了微模芯的表面加工质量与形状精度，研究了熔体温度、注射速度、保压压力、保压时间等微注塑成形工艺参数对微结构聚合物注塑成形角度偏差和填充率的影响。实验结果表明：通过微细磨削加工技术和微注塑成形工艺可以高效率、高精度地制造出规则整齐的微结构注塑工件，注射速度对微成形角度偏差的影响最大，保压压力对微成形填充率的影响最大，微结构模芯的微细磨削形状精度值为4.05 μm，微成形的最小角度偏差和最大填充率分别为1.47°和99.30%。     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

一种基于MEMS工艺的365 GHz硅微波导垂直转接结构

基于微电子机械系统(MEMS)工艺设计并制作了一种THz垂直转接结构,该结构采用6层硅片堆叠的硅微波导形式。理论分析计算了垂直转接结构的参数,并使用三维电磁场分析软件HFSS对该结构进行了模拟仿真。设计得到了中心频率为365 GHz、带宽为80 GHz、芯片尺寸为10 mm×7 mm×2.7 mm的THz垂直转接结构。给出了一套基于MEMS工艺的硅微波导的制作流程,制作了365 GHz垂直转接结构并对其进行测试。获得的THz垂直转接结构的回波损耗随频率变化的测试结果与仿真结果基本一致。采用MEMS工艺制作的硅微波导垂直转接结构具有精度高、一致性好、成本低的特点,满足THz器件的发展需求。     

Acquiring real kinetics of reactions in the inhibitory atmosphere containing product gases using micro fluidized bed

This study proposed an isotope-tagging method to investigate reactions under the atmosphere of product gas. To illustrate this method, the calcination kinetics of calcium carbonate Ca¹³CO₃ in CO₂ atmospheres were investigated by monitoring ¹³CO₂ produced using a micro fluidized bed reaction analyzer (MFBRA). The results demonstrated that the presence of CO₂ in reaction atmosphere increases the apparent activation energy. The increase in the apparent activation energy is, however, significantly overestimated by the thermogravimetric analyzer (TGA) because of the excessive suppression by stagnated product gas inside the sample crucible. Comparatively, the apparent activation energy increases with CO₂ from the MFBRA due primarily to the thermal equilibrium limitation, because the gas diffusion in the MFBRA is essentially eliminated. It is thus concluded that the MFBRA is quite capable of acquiring the real kinetics of reactions in such inhibitory atmospheres.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。